xfce4-power-manager - Preferences


Introduction

This section explains in detail the possible configurations of the power manager running on a laptop computer. Please note that the configurations are different when the power manager is running on a desktop computer, for example you will not have LCD brightness, etc.
You can open the xfce4-power-manager settings dialog either by running the command xfce4-power-manager -c from your terminal emulator or clicking its Icon in the system tray and choosing the “Power manager settings…“ option.

The Xfce Power Manager dialog has four tabs. The first three; General, System and Display, allow you to set various power-related options. The fourth tab, Devices, displays status and information.


General

General tab

Buttons

Here you can specify different results for pressing the specified laptop buttons. Note that not all laptops have dedicated buttons or function key combinations for sleep, suspend or hibernate.

Whether or not your screen is locked when resuming from suspend depends on the Security setting under the System tab of Power Manager.

Brightness buttons

If you want to control screen brightness with the laptop function keys, enable the Handle display brightness keys option. When this options is unchecked, the brightness keys are not handled by the Power Manager but directly by the kernel (if supported).

Hidden setting: Minimum brightness value

Depending on your hardware and setup you may want to specify a minimum brightness level. On some hardware the brightness handling allows the display to be turned off completely, which can be problematic if the user does not know how to turn up the brightness again. To enable this setting run this command (“5” being an example minimum value).

xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/brightness-slider-min-level -s 5

Alternatively you can also create the property via xfce4-settings-editor.

Note: the minimum value should be a value relevant to your backlight interface as shown (on Linux) in the /sys/class/backlight/INTERFACE/* files. For example, a “max_brightness” value of 10,000 means that to set the minimum value at 10%, you would use 1,000 as the brightness-slider-min-level value.

Laptop Lid

You can choose separate options to favor power saving (suspend), security (lock screen) or quick recovery (blank screen), depending on whether you are running on battery or plugged in.

Appearance

By checking Show notifications, you enable informational popups for events like plugging and unplugging or low battery charge.


System

On this page you can set power saving and warning options which pertain to the laptop itself.

System tab

System Power Saving

Critical power

Display

On this page you can set power saving options which pertain to the laptop's display. As with the System power page, the Display options page allows you to set options independently for “on battery” and “plugged in” conditions.

Display tab

Display power management settings

Check Handle display power management to allow Power Manager to manage the laptop's display.

The three options — Blank after, Put to sleep after and Switch off after — are theoretically in ascending order of power saving potential. However, not all laptop hardware is capable of making a distinction among these three modes and there is no direct indication on a laptop if the display is actually being turned off, suspended or just blanked. You may have to experiment to see which, if any, of these options yields the most power savings.

Power Manager does assume that each of these options will work at the hardware level and so it attempts to prevent an illogical configuration; e.g., a Blank after period greater than a Put to sleep after one. In a setup like the one shown in the screenshot above, if you drag the On battery Put to sleep after slider down to, say, 5 minutes, the Blank after slider will automatically move to one minute less. Likewise, if you try to reduce the Switch off after period to less than the other two, it will move the other two sliders to one minute and two minutes less, respectively.

Brightness reduction
These settings allow you to be more or less aggressive with screen brightness reduction depending on whether the laptop is running on battery or plugged in.

Security

Here you can configure details about session locking.

Security tab

Devices

This page displays real-time status in the left pane for the laptop's line power state and battery condition and more detailed device information in the right pane.

Devices tab

Back to Top


Back to xfce4-power-manager main page